|Door phone and indoor keypad being wired up|
|Door phone and indoor keypad installed|
I am concerned if I did not wire the relays and keypads properly that It could end up burning out and/or overheating the power supply(s), relay(s), and/or keypad(s)
|Relay to activate buzzer from phone installed by network.|
|Both relays installed for inside and outside doors.|
|Door phone and exterior keypad being wired up.|
|I drilled a hole on the bottom of the keypad|
housing to let the wires come in from underneath.
This way no water should get in,
and if any does it can drain out.
|Door phone and keypad installed.|