DUE TO ISSUES WITH GOOGLE PHOTOS ALL IMAGES AFTER AUGUST 2015 ARE NOT SHOWING, I AM TRYING TO FIGURE OUT HOW TO GET THIS WORKING!

Friday, July 8, 2011

Installation of Linksys E1000 router and SPA 8000 VoIP ATA



Installation of Linksys E1000 router and SPA 8000 VoIP ATA

















E1000, SPA8000, surge protector and wiring mounted next to NIDs and DSL modem.


Close up of E1000 and SPA8000.


Entire telecom network, New hardware on far right, new 66 block far left.

New 66 block feed from SPA8000.
Terminated to station wiring with bridging clips. 
This was a small installation of an SPA8000 to deliver 8 analog lines via SIP trunking to 8 dedicated telephones. Existing wiring was used and extended going to stations, and was cross connected from terminations on existing 66 blocks to new 66 block that was being fed from the SPA8000 via a 25 pair amphenol cable.

The modem was set into bridge mode and router was set for remote administration. 


No comments:

Post a Comment